top of page
Gen Antirust Enamel
ANTIPRESS + PRIMER + TOP COAT PAINT
It is a three-in-one special metal paint based on alkyd binder with anticorrosive and rust-preventive properties.
Surface Preparation and Application Method
The surfaces to be applied should be cleaned of dirt and oil, swollen rust should be removed with a spatula, wire brush or coarse sandpaper and the surface should be wiped with thinner. It is applied directly to rusty surfaces in two layers. Wait 24 hours between layers and apply the second layer.
Dilution / Mixing Ratio
It should be applied in at least 2 coats by diluting with max. 10% synthetic thinner.
Paintable (Coatable) Area
13 - 15 m²/L in one coat.
Drying Time
At 20°C, it is touch dry in 30 minutes and hard dry in 24 hours. It reaches its full hardness in 7 days.
Recommended Application Appliances
Spray gun, roller or brush
PACKAGING
1kg - 3kg - 20kg
bottom of page