top of page
Genepox Shop Primer
Double compound used to protect steel surfaces against corrosion.
It is a pre-shop primer containing anticorrosive zinc phosphate pigment, based on epoxy resin and cured with polyamide hardener.
Surface Preparation and Application Method
Before application, clean the surface from dust, rust, oil, etc. It should be prepared with an abrasive sand-git blasting at ISO 8501 – 01 Sa 2½ degree. All surface defects should be removed. Surface preparation
After the coating is finished, it should be primed within 1 – 2 hours.
Dilution / Mixing Ratio
Thinner: Gensol Sopprimer Thinner. Mixture: A+B 7+1
Paintable (Coatable) Area
12 m²/kg
Drying Time
It starts to dry to the touch in 5-7 minutes, hardens in 16 hours and completes its drying in 24 hours. (23°C), chemical stability 1 week.
Recommended Application Appliances
Brush, Airmix Spray and Airless.
PACKAGING
20KG (17.5KG A + 2.5KG B)
bottom of page